When Is Copper Repiping Needed In Plumbing Fixtures

By Grace Rivas

Installing piping systems using copper materials offers quality structures that last for long. Plumbing fixtures need to be designed of quality materials to prevent premature damages and frequent repairs. A copper repiping procedure is needed when pipes have begun to fail. Copper pipes designed of galvanized zinc coat tend to suffer from an array of defects including interior surface erosion, pinhole leaks, leakages, bursts, breaking, corrosion, and rusting.

Home premises constructed two to three decades ago may be experiencing problems with the metallic piping systems including the sewerage or clean water pipes. The pipes in those days were designed of galvanized coating material. Although the material was intended to make the pipes last, due to changes in water pressure, temperature, flow of water, as well as mineral composition, the coats fail with time.

In addition, you may need to look for signs such as reduced water pressure. The amount of pressure in a piping system determines how water is able to reach other areas such as the laundry, faucets, and toilets and bathrooms. If you discover that when you open water outlets in all these areas at the same time, the pressure is low than before, then the pipes could be suffering from low-pressure effects.

The earlier you refit them using new enhanced quality materials the better. The modern copper pipes are designed in such a way that they resist corrosion and decay. These pipes can last a lifetime only if they are installed and maintained properly. Because piping systems can accumulate deposits on walls, they need periodic flushes to wash out those deposits.

As rusting and corrosion act on pipes, the surface wears out, and the thickness of pipes reduce. The weak zones become susceptible to bursts and cracks or development of holes, which allow leakages to occur. A copper repipe allows for permanent refitting of entire sections of pipelines thus enhancing the durability of the fixtures. Installing plumbing fixtures is costly and it requires timely and proper maintenance.

If you do not take actions to refit galvanized pipes with new brand piping materials, you will soon deal with a complex problem. The frequent pipe failures and leaks will continue taking up large sums of money, and before you realize it is costing you more dollars in repairs, already you will have spent too much. With help of experienced plumbers, the plumbing fixtures are inspected of defects and then refitting is recommended.

The material is also lightweight but durable. When you repipe your premises, you prevent things such as water damage. The problem of increase in moisture creates daunting moments for homeowners. When pipes start leaking, the water may penetrate through ground and enter the interior of a building. If the leaks are occurring underneath the ground, chances are that they are not detected immediately. It may take long before you realize the pipelines are damaged.

Whether it is a problem of pinhole leaks, corrosion of interior wall surfaces, or rusting of pipes, you can eliminate these issues by using the refitting technique. The replacement strengthens the piping systems and improves quality of water released from pipes. In addition, the copper repiping or refitting also increases durability of plumbing fixtures and this minimizes the costs of maintenance.

About the Author: